Brother Hl l2395dw Hardware Setup

  • Peel off the tapes to open the printer package.
  • Take out the quick start guide, user guide, reference guide, cable, and drum unit from the printer package.
  • Carefully get your printer out of the package.
  • Remove the foam protection and plastic cover from the printer.
  • Clear the packing tapes from the printer’s exterior.
  • Open the scanner glass and remove the protective cover.
  • Open the cartridge access door and peel off the tape.
  • Make sure there are no tapes and other packing materials left inside the printer.
  • Close the cartridge access door.
  • Pull out the paper tray.
  • Remove any packing materials.
  • Close the paper tray.
  • Unwrap the drum unit.
  • Remove the orange plastic material from the drum unit.
  • Insert the drum unit and toner cartridge assembly securely into the printer.

After inserting the drum unit, load paper into the input tray.

Load Paper Correctly In Input Tray

  • Pull the paper tray out.
  • Press the green release lever to unlock the paper guides. Hold it down and slide it away from the center.
  • Fan the paper stack before loading.
  • Place the paper and adjust the guide to the paper size.
  • Close the paper tray.

Once the initial Brother HL-L2395DW setup hardware is completed, move on to the driver installation process. If you need any help connecting your printer to the computer, you can contact us using the call option on this page.