How To Install Canon Imageclass Mf264dw Wireless Setup

Canon Imageclass Mf264dw is an All-in-One wireless printer that lets you connect it to your devices and print directly from them. So, if you want to print from your computer or any other device, you must establish a smooth communication between your printer and the device. To connect your printer and computer/device, you can use the Canon imageclass Mf264dw wireless setup method. Nowadays, people prefer the wireless method to the wired connection.

Now, carry out the instructions on this page to perform the Canon imageCLASS MF264dw wireless setup.

Canon Mf264dw Wireless Setup Using The Printer’s Control Panel

Using The Ssid Method

First, check if your router supports the WPS push button.
Make sure to turn on your printer.
Now, go to the Canon imageCLASS MF264dw printer’s control panel and tap the Menu button.
Choose the Network Settings option from the list.

Choose The Network Settings Option on the printer screen

Select the Wireless LAN Settings option on the printer screen.
Tap the Yes button to enable the wireless LAN process.
Now, the printer will take some time to configure the settings.
Select the SSID Settings option below Wireless LAN Settings.
Tap the Select Access Point option and choose your Wi-Fi network name from the available networks.
Enter your network password and select Apply.
Tap on the Yes button to confirm.

Using The Wps Push Button Method

Make sure to turn on your printer.
Go to the Canon imageCLASS MF264dw printer’s control panel and tap the Menu button.
Tap the Network Settings option from the list. Then, choose the Wireless LAN Settings option on the printer screen.
Tap the Yes button in order to enable the wireless LAN process.
Pick the WPS Push Button Mode option from the list.

Tap the Yes button to confirm.
Next, press and hold the WPS button on your router.
Wait until you see the Connected message on the printer screen.

You can finish the wireless setup on your printer by following the above procedure.

How To Connect The Printer To Your Computer

Connecting your printer to other devices will enable you to print or scan directly from those devices. If you want to connect and print from your computer, you need to download and install the driver that supports your Canon imageCLASS MF264dw printer. The driver will allow your printer to communicate with your computer. By following the below instructions, you can connect your Canon printer to your computer.

First, check if your printer is turned on.

In case you have the driver installation CD that came with your printer package, insert it into your computer’s CD-ROM drive and begin the driver installation process.

However, if you don’t have the installation CD, navigate to the default browser on your computer.

Visit the printer’s official support page.

Here, navigate to your respective printer model - Canon imageCLASS MF264dw and download the driver that is compatible with your computer’s OS.

After completing the driver download on your computer, launch the executable file and start the installation process.

In the Setup Wizard window, select your language from the drop-down list and click the Next button to proceed.

Now, accept the CANON SOFTWARE LICENSE AGREEMENT and click the Yes button.

Select the connection method you want to use and click the Next button.

Perform the instructions on your Canon imageCLASS MF264dw printer screen to finish the connection setup.

Next, choose the drivers you wish to install on your computer and click the Next button.

Follow the on-screen prompts and wait for some time to install the software.

Perform the rest of your on-screen instructions on the printer to complete the driver installation.

And that’s how you perform the Canon Imageclass Mf264dw Wireless Setup.

In case you need further clarifications, make use of the call option on this page to contact our technical experts.