HP LaserJet MFP M234dwe is an all-in-one printer designed for daily printing, scanning, and other printer-related needs. It comes with convenient connectivity options. We have shown you how to perform the HP LaserJet M234DWE wireless setup on this page.

You can set up this LaserJet printer over a wireless network in two ways.

  • Using the HP Smart app
  • Using the Wi-Fi Protected Setup (WPS) method

Both these methods are pretty easy to perform. The section below explains the HP LaserJet M234dwe Wi-Fi setup process using these methods.

HP LaserJet M234DWE Wi-Fi Setup - Two Best Methods

Before beginning the Wi-Fi setup, go through both methods once. After doing that, choose one method that you find easy to perform the HP LaserJet M234dwe wireless setup and execute the same.

HP Smart Connect To Wi-Fi

  • Begin with turning on your HP printer and the computer or smartphone.
  • Connect your computer or smartphone to a stable wireless connection.
  • If you’re using a smartphone, enable the Bluetooth feature on it.
  • Now, check if the printer is in Wi-Fi setup mode. If not, put the printer in the setup mode by restoring its settings to default.
  • You can do this by using the Information, Cancel, and Wi-Fi buttons.
  • First, hold the Information button for a few seconds and release it when the lights on the control panel start flashing.
  • Second, hold the Cancel and Wi-Fi buttons simultaneously.
  • Release the buttons when your HP printer begins to restart.
  • The Wi-Fi Setup mode is enabled on your printer.
  • Now, open the HP Smart app on your computer or smartphone.
  • Click Continue or tap Add Printer to install the printer on your smartphone or computer over the wireless network.

Wi-fi Setup Using The WPS Wireless

  • You need a WPS-enabled wireless router to perform the HP LaserJet M234dwe Wi-Fi setup using the Wi-fi Protected Setup Method.
  • So, initially, get the router you need and follow the instructions below.
  • Check if the Wi-Fi feature is enabled on your printer. You can verify it by checking the Wi-Fi light status. If the light is blinking, the feature is enabled. Otherwise, it is disabled.
  • Press and hold the Wi-Fi button (above the printer screen) for a few seconds to enable the wireless feature on your printer.
    • Hold The Wi-fi Button
  • Now, press the WPS/Wi-Fi or WPS button on your wireless router to connect hp printer to wifi wps.
    • Wps Button On Your Wireless Router
  • The Wi-Fi light blinks continuously when the printer is trying to connect to the network.
  • Once the LaserJet M234dwe printer is connected to the wireless network, the light becomes stable.
  • Now, connect your smartphone or computer to the same network.
  • Use the HP Smart app or the printer software to install the printer on your device.

Do you need further assistance in performing the HP LaserJet M234DWE wireless setup? If yes, it is time to reach our technical expert team. Click the Call button below for the same.