Unbox and set up your HP LaserJet Pro MFP M130nw printer for the first time by following the step-by-step instructions below.

Hp Laserjet Pro M130nw

This multi-functional printer allows you to perform the print, scan, and copy operations over a wireless, wired, or USB connection. It also comes with some great features. The setup process of this HP LaserJet printer is pretty simple and straightforward.

If you’re going to set up the newly bought HP LaserJet Pro M130nw printer for the first time, follow the instructions below. Restore the printer settings to default if you’re setting up a used printer. After doing that:

  • Turn on the printer.
  • Configure the initial settings.
  • Load paper.
  • Finally, install the printer on your device.

Restoring The Printer Settings

  • Open the Setup menu on your printer.
  • Choose Service > Restore Defaults.
  • Now, your printer settings will be restored, and your printer will restart automatically.

Hp Laserjet Pro M130nw- First Time Setup

  • To begin the setup, the HP LaserJet Pro M130nw printer should be ready for the same.
  • So, unpack your printer if you haven’t done it yet. Remove all the packing tapes, cardboard pieces, and other unwanted materials from your printer.
  • The toner cartridge is pre-installed on your printer. Avoid touching or removing the cartridge from the printer when unpacking. Remove the cartridge only when it needs to be replaced.
  • Replacement cartridges: HP 17A Original Black LaserJet Toner Cartridge, CF217A and HP 19A Original LaserJet Imaging Drum, CF219A
  • After doing that, install the dust cover.
  • To do so, open the input tray door and take the dust cover out of the printer.
  • Remove the tapes and align the cover properly. Install the dust cover back into the printer.
  • Now, load the plain paper into the tray.
  • The input tray of this LaserJet printer can hold up to 150 sheets of paper, and it supports different varieties of media types, such as
  • Plain paper
  • Envelopes
  • Labels
  • Cardstock
  • Postcards
  • Choose any one of these media types that fit your printing.
  • After preparing the correct media type, gently raise the dust cover of your printer.
  • Move the guides to the ends.
  • Now, place the paper into the tray with its print-side facing up.
  • Ensure that you have loaded only the recommended number of papers into the tray.
  • Adjust the guides properly and lower the dust cover.
  • Now, turn on your printer.
  • To do so, get the power cord that is provided along with your printer.
  • Plug the cord directly from your HP LaserJet printer’s inlet to the electrical outlet.
  • Ensure that the cord is connected to a working electrical outlet.
  • Now, press the On/Off button (which you can find on the front of the printer) on your printer to turn it on.
  • If you’re turning on your printer for the first time, the screen asking you to choose the printer language will open.
  • Choose the language of your preferences from the list.
  • After doing that, you have to configure the initial settings, such as date/time, region, etc., to complete the HP LaserJet Pro MFP M130nw printer’s hardware setup.
  • Now that the hardware setup is completed, what’s next?
  • Next, you can install your printer on a computer or smartphone over a wireless, wired, or USB connection with the printer’s latest software, Apple AirPrint (iOS and macOS only), HP ePrint, Google Cloud Print, or Wi-Fi Direct.
  • If you wish to install the printer on your computer, run the latest and most compatible printer’s driver (HP Easy Start) on it.
  • Choose the USB, Wired, or Wireless Connection option and connect your printer to the computer using the same when prompted.

Wish to learn more about the Hp Laserjet Pro Mfp M130nw Setup? Then, contact us now. A call option is provided on this page for this purpose.