Want to set up your HP LaserJet Pro MFP M130nw printer wirelessly within a few minutes? Then, read this page completely to know all the possible ways to set up your printer over a wireless network.

Hp Laserjet Pro Mfp M130nw Wi-fi Setup Guide

You can set up your LaserJet printer wirelessly with or without using a router.

Do you have a router connected to a stable internet connection? Then, use the PUSH method of WPS or the Wi-Fi Setup Wizard to connect your printer to the wireless network.

Don’t have a router? No problem. With the Wi-Fi Direct option, you can still wirelessly set up your printer on a computer or smartphone.

Preparing The Devices

The HP LaserJet Pro MFP M130nw wireless setup is pretty easy to perform. However, if your router or printer is not ready, there is a chance for you to face some problems or errors when performing the Wi-Fi setup. So, prepare the devices by following the instructions below and then begin the Wi-Fi setup.

  • Ensure that your HP printer’s hardware setup is completed.
  • Make sure that your computer, router, and printer are turned on and placed in the same room.
  • If you wish to use the Push method of WPS, make sure that the router you’re using has the WPS button.
  • Similarly, if you’re using Wi-Fi Setup Wizard for the wireless setup, gather your network’s SSID (network name; default name can be found in the router’s label or at its back) and the network password.
  • Ensure that the Ready message is displayed on your printer screen.

Using A Router

  • Locate the Setup button on your HP LaserJet printer’s control panel and press it.
  • Choose the Network Setup option from the Setup Menu screen of your printer.
  • Select the Wireless Menu option on the screen that appears next.
  • The available options that allow you to connect your printer to the wireless network will be displayed on the screen.
  • Choose the Wi-Fi Protected Setup (WPS) or Wi-Fi Setup Wizard option on the opened screen.
  • For WPS: Locate your router’s WPS button and press it. Perform the on-screen prompts to connect your printer to the wireless network.
  • For Wi-Fi Setup Wizard: Choose your network name from the list displayed on the screen and type its password when prompted.
  • Once your HP LaserJet printer is connected to your wireless network, you can wirelessly install it on the computer or smartphone of your preference.
  • To do so, first, connect your computer or smartphone (on which you wish to install the printer) to the same wireless network.
  • After doing that, use the printer software or Apple AirPrint (iOS and macOS only) to install the printer on your computer or smartphone.

Without Using A Router

Do you want to wirelessly access the printer from your computer or smartphone but don’t have a router? Then, use the Wi-Fi Direct method for the same.

  • Initially, you have to enable the Wi-Fi Direct feature on your printer if it is disabled. To do so, open the Network Setup screen on your printer.
  • Choose the Wi-Fi Direct option using the arrow buttons on the printer’s control panel.
  • Select the On option to enable the Wi-Fi Direct feature on your printer.
  • Once it is enabled, choose the Connection Method option on the Wi-Fi Direct screen using the arrow buttons.
  • Select Manual or Automatic as per your preferences.
  • Now, go to your computer or smartphone and enable the Wi-Fi feature on it.
  • Locate the Wi-Fi Direct name of your printer and select it.
  • Type the Wi-Fi Direct password in the given field to connect your printer to the computer or smartphone.

Once your devices (printer and computer or smartphone) are connected to the same wireless network, you can wirelessly access the printer from your computer or smartphone as per your needs.

If you need further assistance in performing the Hp Laserjet Pro Mfp M130nw wireless setup, feel free to reach our technical expert team using the call option.